Index › Products › MaxCommG 4G LTE CPE Router WR-106
MaxCommG 4G LTE CPE Router WR-106
WR106
It is an ideal device for broadband wireless access. And could support IEEE 802.11b/g/n, Users could enjoy high speed steadily. In security, it supports all of the Wireless Transfers Encrypt Protocol.
It is the best choice of telecommuting、SOHO and family.
1. Support IEEE 802.11b/g/n
2. Strong local network router with features of DHCP, DNS and NAT/NAPT
3. Routing from WAN to LAN
4. Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability to construct private network.
5. Firewall
6. Support VPN and path through
7. Support 802.1x
8. Support SPI
9. IP filter, IP forwarding, IP QoS
10. Web-based GUI
11. Support LTE
More
1.1 Hardware Interfaces
■2* RJ-45 ports for 10/100 Base-T Ethernet LAN connection to PC or Ethernet WAN port (configuration by software)
■2* LTE internal and external antenna
■2* Wi-Fi internal antenna
■One Reset button to default setting
■One Power jack
■One WPS button
■One S(U)IM card slot
1.2 Main Chipset Information
Item |
Vendor |
Model # & Edition |
Router CPU |
MTK |
MTK7628AN |
LTE CPU |
Qualcomm |
MDM9X07 |
1.3 LED Definitions
L able |
Display Color |
Meaning |
---|---|---|
Power |
Off |
Power off or failure |
Light (Green) |
Power on, normal operation |
|
LTE Status |
Off(Green),Off(Red) |
WAN is not in Mobile network mode |
Light(Green),Off(Red) |
LTE Good RSSI(131-198) |
|
Fast Blink(Green), Off(Red) |
LTE bad RSSI(100-130) |
|
Slow Blink(Green), Off(Red) |
2G/3G RSSI(1-98) |
|
Off (Green), Fast Blink (Red) |
RSSI unknown or immesurable |
|
Off(Green), Light(Red) |
Device is not ready |
|
Off(Green), Slow Blink (Red) |
Device is ready and network is not registered |
|
PPP |
Off |
PPP Connection is down |
Light (Green) |
PPP Connection is up |
|
Blink(Green) |
PPP Connection is start to link _up/ link _down but not up/down |
|
Slow Blink(Green) |
PPP Connection is idle (On _Demand mode) |
|
WIFI |
Off |
WIFI Radio is Off |
Light(Green) |
WIFI Radio is on without data transporting |
|
Blink(Green) |
WIFI Radio is on with data transporting |
|
LAN1-2 (OR WAN) |
Off |
LAN(WAN) port is Off |
Light(Green) |
LAN(WAN) port is on without data transporting |
|
Blink(Green) |
LAN(WAN) port is on with data transporting |
|
WPS |
Off |
WPS is close |
Light(Green) |
WPS is OK |
2 SOFTWARE FEATURES
Router provides the following features:
Protocol & Features Supported |
|||
1 |
RFC 2684 IP Bridging |
||
2 |
RFC 2684 IP Routing |
||
3 |
RFC 2516, PPPoE (Point over Ethernet) over |
||
4 |
Routing: RIP v1, RIP v2 |
||
5 |
Support Static Routing |
||
6 |
NAT & PAT (RFC 1631) |
||
7 |
DMZ support |
||
8 |
NAT with Application Layer Gateway(FTP,TFTP ,L2TP,PPTP,IPSEC...) |
||
9 |
IP Routing: TCP, UDP, ICMP, ARP |
||
10 |
DHCP Client/Server for IP management |
||
11 |
DHCP Relay |
||
12 |
DHCPoption 60/77 |
||
13 |
Pass through/open/redirection and port mapping |
||
14 |
The Range of private IP support192.168.1.2 to 192.168.1.254 |
||
15 |
QoS mechanism support for mapping of IP packet content |
||
16 |
HTTP (web based) for firmware upgrade & configuration |
||
17 |
IP filtering & raw filtering |
||
18 |
IGMPProxysupport |
||
19 |
IEEE 802.1DSpanning tree |
||
20 |
DNS relay |
||
Firewall Features |
|
||
1 |
Source IP address;Destination IP address;Source port addresses Source MAC address;Destination Port addresses;Network Address translation |
|
|
2 |
Statefulpacket inspection |
|
|
3 |
Filtering on port basis |
|
|
Virtual private network support |
|
||
1 |
Standard (IPSec, L2TP, PPTP) pass through |
|
|
2 |
Compatibility with other IPSec VPN gateways |
|
|
3 |
Supports multiple simultaneous login via FTP/www/Telnet |
|
|
Diagnostic |
|
||
1 |
supportdiagnostic function |
|
|
Management features & functionalities |
|
||
1 |
SNMP V2C |
|
|
2 |
Remote upgrade |
|
|
3 |
TFTP/FTP upgrade |
|
|
4 |
Telnet remote access support |
|
|
5 |
support Web based configuration |
|
|
6 |
Support for backup & restore configuration to/from PC |
|
|
7 |
Support TR069 |
|
|
8 |
Support DHCP server for IP management |
|
|
9 |
SNTP |
|
|
General Specification & Operational requirement |
|
||
1 |
Supportin Windows 98, Windows 2000, Windows XP, Windows Vista, Windows7&8,Linux, Apple and Mac OS for Ethernet |
|
|
2 |
System Log |
|
|
3 |
Password & user ID may have special character |
|
|
4 |
IPv4 / IPv6 |
|
|
Applicable for 1port WiFi Modem |
|
||
1 |
Wireless Standard and feature - 802.11g/802.11b/802.11n |
|
|
2 |
64/128 bit WEP support |
|
|
3 |
MAC association control |
|
|
4 |
WPA with pre shared keys |
|
|
5 |
Support Multiple SSIDs (please specify) |
|
|
6 |
Dynamic WEP Key |
|
|
7 |
Support for WPA,WPA2, WPA PSK, TKIP |
|
|
8 |
Support 802.1X |
|
|
3 Specifications and Standards
3.1 Mechanical
The Mercury has the following properties:
Dimension: 130mm*115mm*30mm
3.2 Electrical
3.2.1 LTE Specification
Item |
Description |
Platform and Chipset |
|
Baseband Chipset |
Qualcomm MDM9X07 |
Hardware Specifications |
|
Working Frequency |
LTE-TDD Band 38/40(2600/2300MHz) LTE FDD Band 1/2/3/5/7/8/20(2100/1900/1800/2600/900/800MHz) HSPA+/UMTS Band 1/2/8/5 (2100/1900/900/850MHz) GSM 850/900/1800/1900 |
Network Support |
LTE TDD Band 38/40 LTE FDD Band 1/2/3/5/7/8/20 HSPA+/UMTS850/900/1900/2100Mhz GSM 850/900/1800/1900 |
Software Specifications |
|
Date Service |
LTE DL150Mbps / UL50Mbps HSPA+/UMTS DL 21.6Mbps / UL 5.76Mbps GSM DL 237k bps/ UL 118K bps |
3.2.2 Power Requirements:
Uses an AC adapter that can supply DC voltages.
AC power adaptor: 100VAC-240VAC
DC voltage: 12V,1A
3.2.3 Heat & Power Dissipation
Power: < 6W(*is changeable)
3.3 Environmental
Complies with the following standards:
■Temperature:
- -10to 40degrees C (Standard Operating)
- -20to 70 degree C (Non-operating)
■Humidity:
- 10% to 90% (Non-condensing, Standard Operating)
- 5% to 95% (Non-condensing, Non-operating)
■Vibration: IEC 68-2-36, IEC 68-2-6
■Shock: IEC 68-2-29
■Drop: IEC 68-2-3
« Back